You can find the actual instruction manual here: LINK

The sewing machine has 310 stitch programs, including letters, numbers, various utility and decorative stitches and 10 buttonhole variants. The stitches can be selected directly on the machine or by selecting stitch numbers.

Yes, the stitch length and stitch width can be set using the plus and minus buttons on the machine. The current settings for the selected program are shown on the display. You can increase or decrease the stitch length and stitch width to achieve different effects, including zigzag stitches and caterpillar stitching.
- The stitch length is infinitely variable from 0.0 to 4.5 mm.
- The stitch width is infinitely adjustable from 0.0 to 7.0 mm.

Yes, the VERITAS Marion has an auto-lock function, also known as the automatic sewing function. This function is used to secure the start and end of a seam.

The automatic sewing function makes it possible to lock the start and end of the seam by sewing several times in the same place, creating a knot that secures the seam. This function eliminates the need to sew forwards and backwards several times at the start and end of a seam.

Yes, the thread tension is set using a rotary dial on the top of the machine, the default setting of which is “4”. The correct setting is important for good sewing results and depends on the fabric/stitch combination.

Yes, the start/stop button enables sewing without a foot pedal. The machine starts slowly and then accelerates up to the set speed.

The VERITAS Marion has a fully automatic thread cutter.
After sewing, the thread cutter can be activated at the touch of a button.
Both the upper and lower threads are cut automatically, making the sewing project more efficient and cleaner.

Yes, but the twin needle is not included in the scope of delivery.

The machine stops automatically with the needle in the upper position if the “Needle stop up/down” function is set.

Yes, the machine has a memory function that can be used to save individual stitch patterns and settings. Up to 30 settings can be saved.

The sewing machine must be disconnected from the power supply for maintenance and cleaning. The throat plate can be removed and the feed dog and bobbin case cleaned with a brush. The hook should be regularly cleaned of lint and thread remnants and lubricated with sewing machine oil (not included! Do not use regular cooking oil!). It is important to maintain the machine regularly to ensure a long service life.

The LCD display and the surface of the machine should be cleaned with a soft, dry cloth. If necessary, a damp cloth with a little neutral detergent can be used.

VERITAS Marion is supplied with a wide range of accessories:
All-purpose presser foot (already installed), button presser foot, zipper foot, overlock foot, blindstitch foot, buttonhole foot, satin stitch foot, quality needles, bobbins (3x), stitch pattern card, large slide-on table, holder for stitch pattern card, 64-piece thread set, L-screwdriver, quilting guide, screwdriver small & large, second spool pin, felt pad for spool, spool cap, seam ripper & cleaning brush

The blind stitch foot is a special presser foot that was developed for sewing invisible hems. It is used to sew hems so that the seam on the right side of the fabric is barely visible or not visible at all.

The satin stitch foot is a special presser foot developed for sewing satin stitches and other decorative stitches. It is characterized by a continuous notch on the underside. This notch allows the foot to glide easily over the thickness of the stitch shape created by closely spaced zigzag stitches and to feed the fabric evenly.

Spare parts and accessories can be ordered conveniently from home in our online stores:

• Nähmaschinen Oase (Germany)
• Nähmaschinen Oase (Austria)
• Nähmaschinenshop (Switzerland)
• Home Sewing

If you cannot find the item you need in our store, please contact: shop@home-sewing.com